Code Code Reader 1400 Betriebsanweisung

™ Voyager™ 1400g SeriesArea-Imaging ScannerUser’s Guide

iiWincor Nixdorf Beetle™ Terminal Default Settings...2-8Keyboard Country Layout...2-9Keyboard Style ...

6 - 20Code 11 Message LengthScan the bar codes below to change the message length. Refer to Message Length Description (page 6-2) for additional info

6 - 21that supports concatenation of neighboring symbols, and 4) the standard layout for bar codes on a blood product label. Use the bar codes below

6 - 22Code 128 Code PageCode pages define the mapping of character codes to characters. If the data received does not display with the proper charact

6 - 23GS1-128<Default All GS1-128 Settings>GS1-128 On/OffGS1-128 Message LengthScan the bar codes below to change the message length. Refer to

6 - 24Telepen<Default All Telepen Settings>Telepen On/OffTelepen OutputUsing AIM Telepen Output, the scanner reads symbols with start/stop pat-t

6 - 25Telepen Message LengthScan the bar codes below to change the message length. Refer to Message Length Description (page 6-2) for additional info

6 - 26UPC-A Check DigitThis selection allows you to specify whether the check digit should be transmitted at the end of the scanned data or not. Defa

6 - 27UPC-A Addenda RequiredWhen Required is scanned, the scanner will only read UPC-A bar codes that have addenda. You must then turn on a 2 or 5 d

6 - 28Default = Off.Coupon GS1 DataBar OutputIf you scan coupons that have both UPC and GS1 DataBar codes, you may wish to scan and output only the da

6 - 29UPC-E0<Default All UPC-E Settings>UPC-E0 On/OffMost U.P.C. bar codes lead with the 0 number system. To read these codes, use the UPC-E0 O

iiiIn-Stand Sensor Mode ... 3-6Presentation Mode ... 3

6 - 30UPC-E0 Addenda RequiredWhen Required is scanned, the scanner will only read UPC-E bar codes that have addenda. Default = Not Required.UPC-E0 Ad

6 - 31UPC-E0 Number SystemThe numeric system digit of a U.P.C. symbol is normally transmitted at the beginning of the scanned data, but the unit can b

6 - 32UPC-E1Most U.P.C. bar codes lead with the 0 number system. For these codes, use UPC-E0 (page 6-29). If you need to read codes that lead with t

6 - 33EAN/JAN-13 Check DigitThis selection allows you to specify whether the check digit should be transmitted at the end of the scanned data or not.

6 - 34EAN/JAN-13 Addenda SeparatorWhen this feature is On, there is a space between the data from the bar code and the data from the addenda. When tu

6 - 35EAN/JAN-8<Default All EAN/JAN-8 Settings>EAN/JAN-8 On/OffEAN/JAN-8 Check DigitThis selection allows you to specify whether the check digit

6 - 36EAN/JAN-8 AddendaThis selection adds 2 or 5 digits to the end of all scanned EAN/JAN-8 data.Default = Off for both 2 Digit and 5 Digit Addenda.E

6 - 37MSI<Default All MSI Settings>MSI On/OffMSI Check CharacterDifferent types of check characters are used with MSI bar codes. You can progra

6 - 38When Check Character is set to Validate Type 10/11, but Don’t Transmit, the unit will only read MSI bar codes printed with the specified type ch

6 - 39GS1 DataBar Omnidirectional< Default All GS1 DataBar Omnidirectional Settings >GS1 DataBar Omnidirectional On/OffGS1 DataBar Limited< D

ivData Format Editor Commands...5-4Move Commands...5-5Search Commands

6 - 40GS1 DataBar Expanded< Default All GS1 DataBar Expanded Settings >GS1 DataBar Expanded On/OffGS1 DataBar Expanded Message LengthScan the ba

6 - 41Codablock A<Default All Codablock A Settings>Codablock A On/OffCodablock A Message LengthScan the bar codes below to change the message le

6 - 42Codablock F<Default All Codablock F Settings>Codablock F On/OffCodablock F Message LengthScan the bar codes below to change the message le

6 - 43PDF417< Default All PDF417 Settings >PDF417 On/OffPDF417 Message LengthScan the bar codes below to change the message length. Refer to Me

6 - 44MacroPDF417MacroPDF417 is an implementation of PDF417 capable of encoding very large amounts of data into multiple PDF417 bar codes. When this

6 - 45MicroPDF417 Message LengthScan the bar codes below to change the message length. Refer to Message Length Description (page 6-2) for additional

6 - 46GS1 Composite Code Message LengthScan the bar codes below to change the message length. Refer to Message Length Description (page 6-2) for addi

6 - 47Default = GS1 Emulation Off.TCIF Linked Code 39 (TLC39)This code is a composite code since it has a Code 39 linear component and a MicroPDF417 s

6 - 48QR Code< Default All QR Code Settings >QR Code On/OffThis selection applies to both QR Code and Micro QR Code.QR Code Message LengthScan t

6 - 49information encoded in those bar codes. Once the proper number of codes is reached, the data is output in the order specified in the bar codes.

vISBN Translate... 6-34EAN/JAN-8... 6-35

6 - 50Data Matrix< Default All Data Matrix Settings >Data Matrix On/OffData Matrix Message LengthScan the bar codes below to change the message

6 - 51mined by information encoded in those bar codes. Once the proper num-ber of codes is reached, the data is output in the order specified in the

6 - 52MaxiCode< Default All MaxiCode Settings >MaxiCode On/OffMaxiCode Message LengthScan the bar codes below to change the message length. Ref

6 - 53Aztec Code< Default All Aztec Code Settings >Aztec Code On/OffAztec Code Message LengthScan the bar codes below to change the message leng

6 - 54ter(s), it buffers the number of Aztec bar codes determined by information encoded in those bar codes. Once the proper number of codes is reach

6 - 55Chinese Sensible (Han Xin) Code< Default All Han Xin Settings >Han Xin Code On/OffHan Xin Code Message LengthScan the bar codes below to c

6 - 56China Post (Hong Kong 2 of 5) On/OffChina Post (Hong Kong 2 of 5) Message LengthScan the bar codes below to change the message length. Refer to

6 - 57Korea Post<Default All Korea Post Settings>Korea PostKorea Post Message LengthScan the bar codes below to change the message length. Refe

6 - 58Postal Codes - 2DThe following lists the possible 2D postal codes, and 2D postal code combina-tions that are allowed. Only one 2D postal code s

6 - 59Combination 2D Postal Codes:Planet Code OnAlso see Planet Code Check Digit, page 6-62.Postal-4i OnPostnet OnAlso see Postnet Check Digit, page 6

viChapter 8 - UtilitiesTo Add a Test Code I.D. Prefix to All Symbologies...8-1Show Decoder

6 - 60Postnet and Postal-4i OnPostnet and Intelligent Mail Bar Code OnPostal-4i and Intelligent Mail Bar Code OnPostal-4i and Postnet with B and B’ Fi

6 - 61Planet Code, Postnet, and Postal-4i OnPlanet Code, Postnet, and Intelligent Mail Bar Code OnPlanet Code, Postal-4i, and Intelligent Mail Bar Cod

6 - 62Planet Code Check DigitThis selection allows you to specify whether the check digit should be transmitted at the end of Planet Code data. Defau

6 - 63Australian Post InterpretationThis option controls what interpretation is applied to customer fields in Aus-tralian 4-State symbols. Bar Output

6 - 64

7 - 17Interface KeysKeyboard Function RelationshipsThe following Keyboard Function Code, Hex/ASCII Value, and Full ASCII “CTRL”+ relationships apply

7 - 2The last five characters in the Full ASCII “CTRL”+ column ( [ \ ] 6 - ), apply to US only. The following chart indicates the equivalents of the

7 - 3Supported Interface KeysASCII HEXIBM PC/AT and Compatibles, USB PC KeyboardApple Mac/iMac Supported KeysNUL 00 Reserved ReservedSOH 01 Enter (KP

7 - 4

8 - 18UtilitiesTo Add a Test Code I.D. Prefix to All SymbologiesThis selection allows you to turn on transmission of a Code I.D. before the decoded sy

viiReplacing an Interface Cable... 11-2Troubleshooting a Voyager 1400g Scanner... 11-2Chapter 12 - Customer Sup

8 - 2Show Data FormatScan the bar code below to show current data format settings.Test MenuWhen you scan the Test Menu On code, then scan a programmin

8 - 3Scan DataScan Data allows you to scan bar codes and display the bar code data in a window. Scan Data lets you send serial commands to the scanne

8 - 4Resetting the Factory DefaultsIf you aren’t sure what programming options are in your scanner, or you’ve changed some options and want to restore

9 - 19Serial Programming CommandsThe serial programming commands can be used in place of the programming bar codes. Both the serial commands and the

9 - 2Query CommandsSeveral special characters can be used to query the device about its settings.^ What is the default value for the setting(s).? What

9 - 3NAK Indicates the command was good, but the Data field entry was out of the allowable range for this Tag and SubTag combination, e.g., an entry f

9 - 4the Minimum Message Length (MIN) is set to 2 characters; the Maximum Message Length (MAX) is set to 60 characters; and the Default setting (DFT)

9 - 5Menu CommandsSelectionSetting* Indicates defaultSerial Command# Indicates a numeric entryPageProduct Default SettingsSetting Custom DefaultsSet C

9 - 6Plug and Play Codes: USBUSB Keyboard (PC) PAP124 2-4USB Keyboard (Mac)PAP125 2-4USB Japanese Keyboard (PC)TRMUSB134 2-4USB HID PAP131 2-5USB Seri

9 - 7Program Keyboard Country*U.S.A. KBDCTY0 2-9Albania KBDCTY35 2-9Azeri (Cyrillic) KBDCTY81 2-9Azeri (Latin) KBDCTY80 2-9Belarus KBDCTY82 2-9Belgium

viii

9 - 8Program Keyboard CountryCzech (Programmers)KBDCTY40 2-10Czech (QWERTY) KBDCTY39 2-10Czech (QWERTZ) KBDCTY38 2-10Denmark KBDCTY8 2-10Dutch (Nether

9 - 9Program Keyboard CountryLatvia (QWERTY) KBDCTY43 2-13Lithuania KBDCTY44 2-13Lithuania (IBM) KBDCTY45 2-13Macedonia KBDCTY34 2-13Malta KBDCTY74 2-

9 - 10Program Keyboard CountryUkrainian KBDCTY76 2-15United Kingdom KBDCTY7 2-15United Stated (Dvorak right)KBDCTY89 2-15United States (Dvorak left)KB

9 - 11Keyboard Modifiers *Control + ASCII Off KBDCAS0 2-18DOS Mode Control + ASCIIKBDCAS1 2-18Windows Mode Control + ASCIIKBDCAS2 2-18Windows Mode Pre

9 - 12Word Length: Data Bits, Stop Bits, and Parity7 Data, 1 Stop, Parity Even232WRD32-217 Data, 1 Stop, Parity None232WRD0 2-217 Data, 1 Stop, Parit

9 - 13Scanner-Bioptic ACK/NAK Mode*Bioptic ACK/NAK Off232NAK0 2-25Bioptic ACK/NAK On232NAK1 2-25Scanner-Bioptic ACK/NAK TimeoutACK/NAK Timeout*5100232

9 - 14LED - Good Read Off BEPLED0 3-4*On BEPLED1 3-4Number of Beeps - Error *1 BEPERR3 3-4Range 1 - 9 BEPERR# 3-4Number of Beeps - Good Read *1 BEPRP

9 - 15Presentation Centering WindowPresentation Centering OnPDCWIN1 3-9*Presentation Centering OffPDCWIN0 3-9Left of Presentation Centering Window (*4

9 - 16Centering Window Centering On DECWIN1 3-13*Centering Off DECWIN0 3-13Left of Centering Window (*40%)DECLFT### 3-13Right of Centering Window (*60

9 - 17Function Code Transmit*Enable RMVFNC0 4-4Disable RMVFNC1 4-4Intercharacter Delay Range 0 - 1000 (5ms increments)DLYCHR## 4-5User Specified Inter

1 - 11Getting StartedAbout This ManualThis User’s Guide provides installation and programming instructions for the Voyager™ 1400g area-imaging scanner

9 - 18SymbologiesAll Symbologies All Symbologies Off ALLENA0 6-2All Symbologies On ALLENA1 6-2Codabar Default All Codabar SettingsCBRDFT 6-3Off CBRENA

9 - 19Code 39 Message LengthMinimum (0 - 48) *0 C39MIN## 6-7Maximum (0 - 48) *48C39MAX## 6-7Code 39 Append *Off C39APP0 6-8On C39APP1 6-8Code 32 Pha

9 - 20NEC 2 of 5 Message LengthMinimum (2 - 80) *4 N25MIN## 6-13Maximum (2 - 80) *80N25MAX## 6-13Code 93 Default All Code 93 SettingsC93DFT 6-14Off

9 - 21Matrix 2 of 5 Message LengthMinimum (1 - 80) *4 X25MIN## 6-18Maximum (1 - 80) *80X25MAX## 6-18Code 11 Default All Code 11 SettingsC11DFT 6-19*

9 - 22Telepen Default All TelepenSettingsTELDFT 6-24*Off TELENA0 6-24On TELENA1 6-24Telepen Output *AIM Telepen Output TELOLD0 6-24Original Telepen Ou

9 - 23UPC-E0 Default All UPC-ESettingsUPEDFT 6-29Off UPEEN00 6-29*On UPEEN01 6-29UPC-E0 Expand *Off UPEEXP0 6-29On UPEEXP1 6-29UPC-E0 Addenda Required

9 - 24EAN/JAN-13 Addenda SeparatorOff E13ADS0 6-34*On E13ADS1 6-34ISBN Translate *Off E13ISB0 6-34On E13ISB1 6-34EAN/JAN-8 Default All EAN/JAN 8 Setti

9 - 25MSI Check Character *Validate Type 10, but Don’t TransmitMSICHK0 6-38Validate Type 10 and TransmitMSICHK1 6-38Validate 2 Type 10 Chars, but Don’

9 - 26GS1 DataBar ExpandedDefault All GS1 DataBar Expanded SettingsRSEDFT 6-40Off RSEENA0 6-40*On RSEENA1 6-40GS1 DataBar Expanded Msg. LengthMinimum

9 - 27MacroPDF417 *On PDFMAC1 6-44Off PDFMAC0 6-44MicroPDF417 Default All Micro PDF417 SettingsMPDDFT 6-44On MPDENA1 6-44*Off MPDENA0 6-44MicroPDF417

1 - 22. The scanner beeps. 3. Verify the scanner operation by scanning a bar code from the Sample Symbols in the back of this manual.The unit default

9 - 28QR Code Msg. LengthMinimum (1-7089) *1QRCMIN#### 6-48Maximum (1-7089) *7089QRCMAX#### 6-48QR Code Append *On QRCAPP1 6-49Off QRCAPP0 6-49QR Code

9 - 29Aztec Append On AZTAPP1 6-54*Off AZTAPP0 6-54Aztec Code Page Aztec Code Page (*51)AZTDCP## 6-54Chinese Sensible (Han Xin) CodeDefault All Han Xi

9 - 30Single 2D Postal CodesAustralian Post On POSTAL1 6-58British Post On POSTAL7 6-58Canadian Post On POSTAL30 6-58Intelligent Mail Bar Code OnPOSTA

9 - 31Combination 2D Postal CodesInfoMail and British Post OnPOSTAL8 6-59Intelligent Mail Bar Code and Postnet with B and B’ Fields OnPOSTAL20 6-59Po

9 - 32Combination 2D Postal Codes(continued)Postnet, Postal-4i, and Intelligent Mail Bar Code OnPOSTAL24 6-61Planet, Postal-4i, and Postnet with B and

9 - 33Show Decoder Revision REV_DR 8-1Show Scan Driver Revision REV_SD 8-1Show Software Revision REVINF 8-1Show Data Format DFMBK3? 8-2Resetting the F

9 - 34

10 - 110Product SpecificationsVoyager 1400g Scanner Product SpecificationsParameter SpecificationMechanicalHeight1.7 inches (43mm)Length7.1 inches (18

10 - 26.7 mil PDF417 35 - 100mm (1.4 - 3.9 in.)10mil Data Matrix 35 - 105mm (1.4 - 4.1 in.)20mil QR Code 25 - 205mm (1 - 1.81 in.) Guaranteed Performa

10 - 3Standard Connector PinoutsNote: The following pin assignments are not compatible with Honeywell legacy products. Use of a cable with improper p

1 - 33. Turn the terminal/computer power back on. The scanner beeps.4. Verify the scanner operation by scanning a bar code from the Sample Symbols in

10 - 4USB10 Pin Modular PlugRS485 Output10 Pin RJ41 Modular PlugNote: RS485 signal conversion is performed in the cable. 1 Cable shield2 Cable select3

11 - 111MaintenanceRepairsRepairs and/or upgrades are not to be performed on this product. These ser-vices are to be performed only by an authorized

11 - 2• Order replacement cables from Honeywell or from an authorized distributor.• When ordering a replacement cable, specify the cable part number o

11 - 3• You need to program a suffix. Programming a suffix enables the scanner to output the bar code data plus the key you need (such as “CR”) to en

11 - 4

12 - 112Customer SupportTechnical AssistanceIf you need assistance installing or troubleshooting your device, please contact us by using one of the me

12 - 2This warranty shall extend from the time of shipment for the duration published by HII for the product at the time of purchase ("Warranty P

A - 1AReference ChartsSymbology ChartsNote: “m” represents the AIM modifier character. Refer to International Technical Specification, Symbology Iden

A - 2GS1GS1 DataBar ]em 0y79GS1 DataBar Limited ]em { 7BGS1 DataBar Expanded ]em }7DGS1-128 ]C1 I 492 of 5China Post (Hong Kong 2 of 5)]X0 Q 51Interle

A - 32D SymbologiesPostal SymbologiesAIM HoneywellSymbology IDPossible modifiers (m)ID HexAll Symbologies 99Aztec Code ]zm 0-9, A-C z 7AChinese Sensi

DisclaimerHoneywell International Inc. (“HII”) reserves the right to make changes in speci-fications and other information contained in this document

1 - 4Connecting with RS232 Serial Port1. Turn off power to the terminal/computer.2. Connect the appropriate interface cable to the scanner.Note: For t

A - 4ASCII Conversion Chart (Code Page 1252)In keyboard applications, ASCII Control Characters can be represented in 3 dif-ferent ways, as shown below

A - 5Lower ASCII Reference TableNote: Windows Code page 1252 and lower ASCII use the same characters. 11 0B VT Tab CTRL+ K hyperlink12 0C FF Delete CT

A - 636 24 $ 68 44 D 100 64 d37 25 % 69 45 E 101 65 e38 26 & 70 46 F 102 66 f39 27 ' 71 47 G 103 67 g40 28 ( 72 48 H 104 68 h41 29 ) 73 49 I

A - 7134 86 †åHome 0x47135 87 ‡çEnd 0x4F136 88 ˆ ê Page Up 0x49137 89 ‰ ë Page Down 0x51138 8A ŠèRight ALT 0x38139 8B ‹ ï Right CTRL 0x1D140 8C ŒîRese

A - 8173 AD ¡ Control Break 0x9D174 AE ®«Alt Sequence with 1 Character 0x36175 AF ¯»Ctrl Sequence with 1 Character 0x1D176 B0 ° ░177 B1 ± ▒178 B2 ² ▓1

A - 9212 D4 Ô ╘213 D5 Õ ╒214 D6 Ö ╓215 D7 × ╫216 D8 Ø ╪217 D9 Ù ┘218 DA Ú ┌219 DB Û █220 DC Ü ▄221 DD Ý ▌222 DE Þ ▐223 DF ß ▀224 E0 à α225 E1 áß226 E2

A - 10ISO 2022/ISO 646 Character ReplacementsCode pages define the mapping of character codes to characters. If the data received does not display wi

A - 11France ISO/IEC646‐69 3 83Germany ISO/IEC646‐21 4 84Switzerland ISO/IEC646‐CH 6 86Sweden/Finland(extendedAnnexC) ISO/IEC646‐11 2 82Irel

A - 12Dec35 36 64 91 92 93 94 96 123 124 125 126Hex23 24 40 5B 5C 5D 5E 60 7B 7C 7D 7EUS 0 1 # $ @ [ \ ] ^ ` { | } ~CA54 95# $ à â ç ê î ô é ù è ûCA 1

A - 13Unicode Key Maps6E70 71 72 73 74 75 76 77 78 79 7A 7B 7C 7D 7E4B 50 554C 51 560102 03 04 05 06 07 08 09 0A 0B 0C 0D 0F10 11 12 1314 15 16 17 18

1 - 5Connecting with RS485A scanner or cordless base can be connected for an IBM POS terminal interface.1. Connect the appropriate interface cable to

A - 14

Sample SymbolsUPC-A0 123456 7890Interleaved 2 of 5Code 128EAN-13Code 39Codabar1234567890Code 1289 780330 290951BC321A13579BCode 93123456-9$Straigh

Sample Symbols6543210GS1 DataBar(01)00123456789012PDF417Car RegistrationData MatrixQR CodeTest Symb o lNumbersMatrix 2 of 5ID-tag (UPU 4-State)J18CUSA

Sample SymbolsAztecMaxiCodeMicro PDF417Package LabelTest MessageTest MessagePostnetZip Code

Programming Chart1023675489

Programming ChartNote: If you make an error while scanning the letters or digits (before scanning Save), scan Discard, scan the correct letters or dig

VG1400-UG Rev C9/14Honeywell Scanning & Mobility9680 Old Bailes RoadFort Mill, SC 29707

1 - 6Reading TechniquesThe scanner has a view finder that projects a bright red aiming beam that corre-sponds to the scanner’s horizontal field of vie

1 - 7Setting Custom DefaultsYou have the ability to create a set of menu commands as your own, custom defaults. To do so, scan the Set Custom Default

1 - 8

2 - 12Programming the InterfaceIntroductionThis chapter describes how to program your system for the desired interface.Programming the Interface - Plu

2 - 2RS232 Serial PortThe RS232 Interface bar code is used when connecting to the serial port of a PC or terminal. The following RS232 Interface bar

2 - 3Each bar code above also programs the following suffixes for each symbology:* Suffixes programmed for Code 128 with IBM 4683 Port 5B, IBM 4683 Po

2 - 4USB IBM SurePosScan one of the following “Plug and Play” codes to program the scanner for an IBM SurePos (USB handheld scanner) or IBM SurePos (U

2 - 5USB HIDScan the following code to program the scanner for USB HID bar code scan-ners.USB SerialScan the following code to program the scanner to

Product Agency ComplianceUSAFCC Part 15 Subpart B Class BThis device complies with part 15 of the FCC Rules. Operation is subject to the following tw

2 - 6Verifone® Ruby Terminal Default SettingsScan the following Plug and Play code to program the scanner for a Verifone Ruby terminal. This bar code

2 - 7Honeywell Bioptic Aux Port ConfigurationScan the following Plug and Play code to program the scanner for a Honeywell bioptic scanner auxiliary po

2 - 8Wincor Nixdorf Terminal Default SettingsScan the following Plug and Play code to program the scanner for a Wincor Nix-dorf terminal. This bar co

2 - 9Keyboard Country LayoutScan the appropriate country code below to program the keyboard layout for your country or language. As a general rule, th

2 - 10Keyboard Country (continued)Bulgaria (Latin)Canada (French)Canada (Multilingual)CroatiaCzechCzech (Programmers)Czech (QWERTY)Czech (QWERTZ)Bulga

2 - 11Keyboard Country (continued)FinlandGaelicGermanyGreekGreek (220 Latin)Greek (220)Greek (319 Latin)Greek (319)FaeroeseFranceEstoniaGreek (Latin)G

2 - 12Keyboard Country (continued)Italian (142)Hungarian (101 key)IcelandIrishItalyJapan ASCIIKazakhKyrgyz (Cyrillic)HebrewHungaryGreek (Polytonic)Lat

2 - 13Keyboard Country (continued)Lithuania (IBM)MaltaMongolian (Cyrillic)NorwayPolandPolish (214)Polish (Programmers)PortugalLithuaniaMacedoniaLatvia

2 - 14Keyboard Country (continued)SCSSerbia (Latin)SlovakiaSlovakia (QWERTY)Slovakia (QWERTZ)SloveniaSpainSpanish variationRussian (Typewriter)Serbia

2 - 15Keyboard Country (continued)Keyboard StyleThis programs keyboard styles, such as Caps Lock and Shift Lock. If you have used Keyboard Conversion

UL StatementUL listed: UL60950-1, 2nd Edition.CanadaIndustry Canada ICES-003This Class B digital apparatus complies with Canadian ICES-003. Opera-ti

2 - 16Regular is used when you normally have the Caps Lock key off.Caps Lock is used when you normally have the Caps Lock key on.Shift Lock is used wh

2 - 17Emulate External Keyboard should be scanned if you do not have an external keyboard (IBM AT or equivalent). Note: After scanning the Emulate Ex

2 - 18Default = Off.Keyboard ModifiersThis modifies special keyboard features, such as CTRL+ ASCII codes and Turbo Mode.Control + ASCII Mode On: The s

2 - 19Turbo Mode: The scanner sends characters to a terminal faster. If the terminal drops characters, do not use Turbo Mode. Default = OffNumeric

2 - 20RS232 Baud RateBaud Rate sends the data from the scanner to the terminal at the specified rate. The host terminal must be set for the same baud

2 - 21RS232 Word Length: Data Bits, Stop Bits, and ParityData Bits sets the word length at 7 or 8 bits of data per character. If an applica-tion requ

2 - 22RS232 Receiver Time-OutThe unit stays awake to receive data until the RS232 Receiver Time-Out expires. A manual trigger resets the time-out. W

2 - 23RS232 TimeoutWhen using Flow Control with Timeout, you must program the length of the delay you want to wait for CTS from the host. Set the len

2 - 24the scanner waits for ACK/NAK again. Turn on the ACK/NAK protocol by scanning the ACK/NAK On bar code below. To turn off the protocol, scan AC

2 - 25Scanner-Bioptic ACK/NAK ModeBioptic ACK/Nak On must be scanned so the scanner will wait for an ACK or NAK from a bioptic scanner after each pack

Honeywell Scanning & Mobility Product Environmental InformationRefer to www.honeywellaidc.com/environmental for the RoHS / REACH / WEEE informatio

2 - 26

3 - 13Input/Output SettingsPower Up BeeperThe scanner can be programmed to beep when it’s powered up. Scan the Off bar code(s) if you don’t want a po

3 - 2Good Read and Error IndicatorsBeeper – Good ReadThe beeper may be programmed On or Off in response to a good read. Turning this option off, only

3 - 3Beeper Pitch – Good ReadThe beeper pitch codes modify the pitch (frequency) of the beep the scan-ner emits on a good read. Default = Medium.Beep

3 - 4LED – Good ReadThe LED indicator can be programmed On or Off in response to a good read. Default = On.Number of Beeps – Good ReadThe number of b

3 - 5Good Read DelayThis sets the minimum amount of time before the scanner can read another bar code. Default = 0 ms (No Delay).User-Specified Good

3 - 6LED Illumination - Manual TriggerIf you wish to set the illumination LED brightness, scan one of the bar codes below. This sets the LED illumina

3 - 7Presentation ModePresentation Mode uses ambient light to detect bar codes. The LED dims until a bar code is presented to the scanner, then the L

3 - 8Presentation CenteringUse Presentation Centering to narrow the scanner’s field of view when it is in the stand to make sure the scanner reads onl

3 - 9Scan Presentation Centering On, then scan one of the following bar codes to change the top, bottom, left, or right of the centering window. Then

PatentsFor patent information, please refer to www.hsmpats.com.Solids and Water ProtectionThe Voyager 1400g has a rating of IP42, immunity of foreign

3 - 10Mobile Phone Read ModeWhen this mode is selected, your scanner is optimized to read bar codes from mobile phone or other LED displays. However,

3 - 11Use shorter delays in applications where repetitive bar code scanning is required. Reread Delay only works when in Presentation Mode (see page

3 - 12In the example below, the white box is the centering window. The centering window has been set to 20% left, 30% right, 8% top, and 25% bottom.

3 - 13Scan Centering On, then scan one of the following bar codes to change the top, bottom, left, or right of the centering window. Then scan the pe

3 - 14Video ReverseVideo Reverse is used to allow the scanner to read bar codes that are inverted. The Video Reverse Off bar code below is an example

3 - 15Working OrientationSome bar codes are direction-sensitive. For example, KIX codes and OCR can misread when scanned sideways or upside down. Us

3 - 16

4 - 14Data EditingPrefix/Suffix OverviewWhen a bar code is scanned, additional information is sent to the host computer along with the bar code data.

4 - 2symbology to which you want to apply the prefix or suffix. For example, for Code 128, Code ID is “j” and Hex ID is “6A”.Step 3. Scan the 2 hex d

4 - 3Step 1. Scan the Clear One Prefix or Clear One Suffix symbol.Step 2. Determine the 2 digit Hex value from the Symbology Chart (included in the Sy

Required Safety LabelsCompliance Markings information, Part Number, and Serial Number informationCompliance Markings information

4 - 4Suffix SelectionsFunction Code TransmitWhen this selection is enabled and function codes are contained within the scanned data, the scanner trans

4 - 5Intercharacter DelayAn intercharacter delay of up to 5000 milliseconds (in 5ms increments) may be placed between the transmission of each charact

4 - 6Interfunction DelayAn interfunction delay of up to 5000 milliseconds (in 5ms increments) may be placed between the transmission of each segment

5 - 15Data FormattingData Format Editor IntroductionYou may use the Data Format Editor to change the scanner’s output. For exam-ple, you can use the

5 - 2you are programming. (See Primary/Alternate Data Formats on page 5-8 for further information.)Step 3. Terminal TypeRefer to Terminal ID Table (p

5 - 3Other Programming SelectionsClear One Data Format This deletes one data format for one symbology. If you are clearing the primary format, scan

5 - 4Data Format Editor CommandsSend CommandsSend all charactersF1 Include in the output message all of the characters from the input message, startin

5 - 5ASCII code, and xx stands for the insert character’s hex value for its ASCII code. Refer to the ASCII Conversion Chart (Code Page 1252), beginni

5 - 6Search backward for a characterF9 Search the input message backward for “xx” character from the current cursor position, leaving the cursor point

5 - 7Stop replacing charactersE5 Terminates character replacement. Syntax = E5.Compare charactersFE Compare the character in the current cursor posit

5 - 8Default = Data Formatter On, Not Required, Keep Prefix/Suffix.Primary/Alternate Data FormatsYou can save up to four data formats, and switch betw

6 - 16SymbologiesThis programming section contains the following menu selections. Refer to Chapter 9 for settings and defaults.• All Symbologies • In

6 - 2All SymbologiesIf you want to decode all the symbologies allowable for your scanner, scan the All Symbologies On code. If on the other hand, you

6 - 3Codabar<Default All Codabar Settings>Codabar On/OffCodabar Start/Stop CharactersStart/Stop characters identify the leading and trailing end

6 - 4When Check Character is set to Validate, but Don’t Transmit, the unit will only read Codabar bar codes printed with a check character, but will n

6 - 5Codabar Message LengthScan the bar codes below to change the message length. Refer to Message Length Description (page 6-2) for additional infor

6 - 6Code 39< Default All Code 39 Settings >Code 39 On/OffCode 39 Start/Stop CharactersStart/Stop characters identify the leading and trailing e

6 - 7When Check Character is set to Validate and Transmit, the scanner only reads Code 39 bar codes printed with a check character, and will transmit

6 - 8acter(s), it buffers Code 39 bar codes until it reads a Code 39 bar code that does not have the append trigger. The data is then transmitted in

6 - 9Full ASCIIIf Full ASCII Code 39 decoding is enabled, certain character pairs within the bar code symbol will be interpreted as a single character

iChapter 1 - Getting StartedAbout This Manual ... 1-1Unpacking Your Device...

6 - 1010), and scan the value and the Save bar code from the Programming Chart on the inside the back cover of this manual. The data characters shoul

6 - 11When Check Digit is set to Validate and Transmit, the scanner only reads Interleaved 2 of 5 bar codes printed with a check digit, and will trans

6 - 12NEC 2 of 5< Default All NEC 2 of 5 Settings >NEC 2 of 5 On/OffCheck DigitNo Check Digit indicates that the scanner reads and transmits bar

6 - 13NEC 2 of 5 Message LengthScan the bar codes below to change the message length. Refer to Message Length Description (page 6-2) for additional i

6 - 14Code 93< Default All Code 93 Settings >Code 93 On/OffCode 93 Message LengthScan the bar codes below to change the message length. Refer t

6 - 15which the bar codes are read, deleting the first space from each. The scanner transmits the appended data when it reads a Code 93 bar code that

6 - 16Straight 2 of 5 Industrial (three-bar start/stop)<Default All Straight 2 of 5 Industrial Settings>Straight 2 of 5 Industrial On/OffStraigh

6 - 17Straight 2 of 5 IATA (two-bar start/stop)<Default All Straight 2 of 5 IATA Settings>Straight 2 of 5 IATA On/OffStraight 2 of 5 IATA Messag

6 - 18Matrix 2 of 5<Default All Matrix 2 of 5 Settings>Matrix 2 of 5 On/OffMatrix 2 of 5 Message LengthScan the bar codes below to change the me

6 - 19Code 11<Default All Settings>Code 11 On/OffCode 11 Check Digits RequiredThis option sets whether 1 or 2 check digits are required with Co