Code CR3500 Wireless Quick Start Bedienungsanleitung PDF herunterladen (Seite 2)

3. Scan the newly created QuickConnect code, and then

scan the Save Sengs code (M188_02).

4. Next, a Serial Applicaon must be opened to transmit data from the CR3500 to the PC.

Visit www.codecorp.com/downloads.php and download/install CodeXML® Router,

CortexTools™ or open a HyperTerminal. Once installed, select the COM Port of your

reader (see step 2) to complete the wireless setup.

Installing a Baery Handle

1. To aach a Baery Handle, insert the tab on the back

of the Baery Handle into the reader’s recessed slot.

2. Press the reader down, towards the handle to snap

into place. Oponally, the reader can be further

secured to the handle with two threaded screws on

the underside of the reader and handle (screws are

included with Baery Handles).

3. To detach a Baery Handle, slide the locking mecha-

nism on the reader up and pull the baery handle up

and away from the slot on the reader.

CR3500 Wireless Setup

Establishing a Bluetooth Connecon with a non-Code Bluetooth Adapter:

1. Visit hp://www.codecorp.com/bdaddr.php and follow the instrucons to create and

print a QuickConnect Code that is specic to your adapter.

2. Plug the adapter into the USB port on your computer, and follow the installaon

instrucons included with your adapter. Make note of the COM Port assigned to the

adapter (e.g. COM 11).

Note: Detailed instrucons, including screen shots, on connecng a CR3500 to

non-Code Bluetooth devices can be found in the CR3500 User Manual available at

www.codecorp.com.

Powering On a CR3500

To power on a CR3500, press and hold either

trigger buon for approximately one second.

To establish a Bluetooth connecon via Code’s CodeXML® M3 Modem, please refer to the

CodeXML® M3 Modem QuickStart Guide, available at www.codecorp.com.

The default seng on the CR3500 has Sux Enter disabled. To enable the Sux Enter for

USB and Carriage Return/Line Feed for RS232 scan the conguraon code, followed by the

Save Sengs (M188_02) bar code above:

CR3500 Default Sengs

Codabar

Codablock F

Code 11

Code 39

Code 39 Short Margin

Int 2 of 5

PDF417

Telepen

UPC

UPC Short Margin

UPC-E Expansion

Code 39 Triopc

Code 93

Code 128

Code 128 Short Margin

Data Matrix

The CR3500, out of the box, will read the following bar codes:

To congure a CR3500 to read bar codes not listed, please download the CR3500 User Manual

from www.codecorp.com and scan the appropriate ‘Enable’ bar code reading symbology

conguraon code.

Sux Enter Conguraon

Enable Sux Enter - USB Enable Carriage Return/Line Feed - RS232

For more conguraon opons, including disabling the Sux Enter conguraon, download the

CR3500 User Manual from www.codecorp.com.

1 2

Kommentare zu diesen Handbüchern

Keine Kommentare

Code CR3500 Wireless Quick Start Bedienungsanleitung Seite 2

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Ausrüstung Code CR3500 Wireless Quick Start