search

Code Two-Bay Battery Charger Bedienungsanleitung Seite 1

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Hardware Code Two-Bay Battery Charger herunter. Code Two-Bay Battery Charger User Manual Benutzerhandbuch

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 2
  • Inhaltsverzeichnis
  • LESEZEICHEN
    • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 0
14870 S. Pony Express Rd. #200 Bluffdale, UT 84065
www.codecorp.com (801) 495-2200
A red LED = reader/battery is charging
A green LED = reader/battery is fully charged*
*Note: In certain reader congurations, the radio is required to
always on, therfore requiring a constant power draw. In these
instances, while the power draw is minimal, the LED light may
never turn green when charging a battery attached to a reader.
Charging a Battery Cartridge:
Charging Status:
Each charging bay has an LED light to indicate the charging status of the battery or
reader. Once the reader, or battery, is engaged with the charging clips - the LED light
associated to that charging bay will light up. (Figure 6)
Figure 6
© 2012 Code Corporation. All rights reserved.
C001529_07_TwoBayBatteryCharger_Quickstart C001529_07_TwoBayBatteryCharger_Quickstart
14870 S. Pony Express Rd. #200 Bluffdale, UT 84065
www.codecorp.com (801) 495-2200
A red LED = reader/battery is charging
A green LED = reader/battery is fully charged*
*Note: In certain reader congurations, the radio is required to
always on, therfore requiring a constant power draw. In these
instances, while the power draw is minimal, the LED light may
never turn green when charging a battery attached to a reader.
Charging a Battery Cartridge:
To charge a battery, install 2 two plastic inserts into
a charging bay. (Figure 3)
Press down rmly on the inserts, until you hear
them click into place. (Figure 4)
Figure 4
Place the battery cartridge, with the manufacturer
label facing forward, into the charging bay.
(Figure 5)
Charging Status:
Figure 5
Each charging bay has an LED light to indicate the charging status of the battery or
reader. Once the reader, or battery, is engaged with the charging clips - the LED light
associated to that charging bay will light up. (Figure 6)
Figure 6
© 2012 Code Corporation. All rights reserved.
Figure 3
To charge a battery, install 2 two plastic inserts into
a charging bay. (Figure 3)
Press down rmly on the inserts, until you hear
them click into place. (Figure 4)
Figure 4
Place the battery cartridge, with the manufacturer
label facing forward, into the charging bay.
(Figure 5)
Figure 5
Figure 3
Seitenansicht 0
1 2

Inhaltsverzeichnis

Seite 1 - Charging Status:

14870 S. Pony Express Rd. #200 Bluffdale, UT 84065www.codecorp.com (801) 495-2200A red LED = reader/battery is chargingA green LED = reader/

Seite 2 - Two-Bay Battery Charger

Quickstart GuideTwo-Bay Battery ChargerQuickstart GuideIncluded:Charging a CR2 or CR2500 bar code reader:Figure 1The Two-Bay Battery Charger features

Kommentare zu diesen Handbüchern

Keine Kommentare
Verwandte Produkte und Handbücher für Hardware Code Two-Bay Battery Charger
Hardware Code ECS-H Charger Bedienungsanleitung   (1 Seiten)
Hardware Code CR2600 Charging Station Bedienungsanleitung   (2 Seiten)
Hardware Code CR2 Cable Pinouts Bedienungsanleitung   (4 Seiten)
Hardware Code Single-Bay Battery Charger Bedienungsanleitung   (2 Seiten)
  • VDigi Doug-fleenor-design GreenTech Assistive Technology Analytical Technology
  • SBS Mobile Headsets Philips Zusätzliche Musikausrüstung Avent Flaschensterilisatoren Ninja Auto-Kits Avaya Modems
  • Acer Aspire 5530 Magellan ProMark 3 Bosch 3931A-PBH Yamaha RX-V359 Jk-audio TAP-1
  • Florabest Water Timer Bedienungsanleitung Globalsat TR-203A Bedienungsanleitung Poulan P3500 Bedienungsanleitung Samsung GT-B7330 Bedienungsanleitung Behringer FEEDBACK DESTROYER PRO FBQ2496 Bedienungsanleitung